timken SNW-24 x 4 3/16 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies

SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies are a NTN-SNR BEARING RULMENTI S.R.L. few brands 43.55 kN C you 200 °C T max. will find in our inventory. Find timken SNW-24 x 4 3/16 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies to see what's 22 Nm Recommended tightening torque for set screw in stock!

What is SNW-24 x 4 3/16 bearing interchange?

Brand Name:timken
Model Number:SNW-24 x 4 3/16
T max.:200 °C
Recommended tightening torque for set screw:22 Nm
C:43.55 kN
B:32.5 mm
G:M6x1
A2:61.4 mm
Weight:3.21 kg
e:25 mm

Product Details

T max.200 °C
Recommended tightening torque for set screw22 Nm
C43.55 kN
B32.5 mm
GM6x1
A261.4 mm
Weight3.21 kg
e25 mm
T min.-20 °C
N19mm
View more

Company Profile

Phone 321-837-7374
View more

Related News

  • How to Find Bearing Numbers by Size - SciencingMeasure the inside diameter first. Open the micrometer to the approximate size of the inside opening. Slowly adjust the micrometer until the measuring surface on  BALL BEARINGS SIZE CHART How to...
  • 10. Assembly and disassembly of bearings | ZKL GroupIf a non-separable bearing with overlap on shaft and in body is mounted, the mounting force must act on both rings equally (fig. 10.6). Rings of separable bearings  Repair of Bearings with...
  • what causes a throwout bearing to go bad? Part 2| GrassrootsSounds like bad grease, too high of temp, or bad spacing. If there is not enough space for the tob, it can ruin the input shaft seal and the tob. I had  Throw Out Bearing Noise: How to...
  • Recommended Products

    All Products Contact Now