NTN-SNR BEARING RULMENTI S.R.L.

Single row angular contact ball bearings

Single row angular contact ball bearings have single raceway grooves in the inner and outer rings that are relatively offset. These bearings can support axial loads in one direction only.

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.Small contact angle type has higher permissible speed capability.This bearing type is generally used in adjacent positions

Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions..

400 mm x 600 mm x 90 mm skf 7080 BM Single row angular contact ball bearings: B : 39,688 mm; r min. : 3,6 mm

800 mm x 1150 mm x 155 mm skf 70/800 AMB Single row angular contact ball bearings: Outer Diameter (mm) : 70; d : 65 mm

55 mm x 120 mm x 29 mm skf 7311 BEGAP Single row angular contact ball bearings: Da : 218 mm; T : 57,15 mm

55 mm x 120 mm x 29 mm skf 7311 BEGAM Single row angular contact ball bearings: s : 5 mm / Axial displac; Size (mm) : 55 mm x 120 mm x 29 mm

65 mm x 120 mm x 23 mm skf 7213 BEGAPH Single row angular contact ball bearings: r min. : 2 mm; Da max. : 101 mm

25 mm x 62 mm x 17 mm skf 7305 BEY Single row angular contact ball bearings: Cg - Geometry Factor : 0.0886; Cage Type : Stamped Steel

1000 mm x 1420 mm x 185 mm skf 70/1000 AMB Single row angular contact ball bearings: D : 1320 mm; (Grease) Lubrication Speed : 330 r/min

400 mm x 600 mm x 90 mm skf 7080 AM Single row angular contact ball bearings: Bearing number : 432218U; Outer Diameter (mm) : 160

20 mm x 52 mm x 15 mm skf 7304 BEGAP Single row angular contact ball bearings: da - Cone Frontface Backing Diameter : 1.65 in; K - Factor8 : 0.87

1250 mm x 1500 mm x 112 mm skf 718/1250 AMB Single row angular contact ball bearings: d1 : 71,5 mm; Cur : 4700 N / Fatigue lim

25 mm x 62 mm x 17 mm skf 7305 BEP Single row angular contact ball bearings: B : 33 mm; Width : 33 mm

1700 mm x 1900 mm x 80 mm skf BA1B 307756 Single row angular contact ball bearings: ra (max) : 3 mm; Dynamic Load Rating : 2,390,000 N