NTN-SNR BEARING RULMENTI S.R.L.

Single row angular contact ball bearings

Single row angular contact ball bearings have single raceway grooves in the inner and outer rings that are relatively offset. These bearings can support axial loads in one direction only.

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.Small contact angle type has higher permissible speed capability.This bearing type is generally used in adjacent positions

Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions..

25 mm x 52 mm x 15 mm skf 7205 BEP Single row angular contact ball bearings
2744 kN
200
◂ Previous page
All Products Contact Now
Product Categories
Deep groove ball bearings
Double row spherical roller bearings
Plain bearings,Bushings
Radial shaft seals for general industrial applications
Radial shaft seals for heavy industrial applications
Radial spherical plain bearings
SAF and SAW pillow blocks with bearings on an adapter sleeve
Single row angular contact ball bearings
Single row cylindrical roller bearings
Single row deep groove ball bearings
Single row or matched pairs of angular contact ball bearings
Single row tapered roller bearings
SKF Speedi-Sleeve
SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
Solid Block/Spherical Roller Bearing Housed Units-Double Concentric Four-Bolt Pillow Block
Timken Hm518445 Bearing
3984 Timken Bearing
Timken 13889 Replacement Bearing
Lm12748f Bearing