NTN-SNR BEARING RULMENTI S.R.L.

Single row cylindrical roller bearings

Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.

Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.

95 mm x 170 mm x 32 mm NTN N219 Single row cylindrical roller bearings: L(mm) : 3 ～ 100; Days to Ship : 7 Days

90 mm x 160 mm x 30 mm NTN N218G1C3 Single row cylindrical roller bearings: Unit, Type : Insert Bearing Unit; Unit Body Material : Cast Iron

90 mm x 160 mm x 30 mm SNR N218EG15C3 Single row cylindrical roller bearings: Bearing I.D. d(mm) : 8; Seals : VV (Non-Contact Rubb

90 mm x 160 mm x 30 mm SNR N.218.E.G15 Single row cylindrical roller bearings: Bearing Used : Deep Groove Ball Bea; Number of Bearings : Double

70 mm x 125 mm x 24 mm NTN NJ214C3 Single row cylindrical roller bearings: Dynamic load, C : 1,520 kN; Characteristic outer ring frequency, BPF0 : 10.14 Hz

90 mm x 160 mm x 30 mm NTN N218C3 Single row cylindrical roller bearings: A1 : 10 mm; T max. : 100 °C

90 mm x 160 mm x 30 mm NTN N218 Single row cylindrical roller bearings: Dynamic load, C : 176 kN; Nlim (grease) : 2,300 rpm

65 mm x 120 mm x 23 mm NTN NJ213G1C3 Single row cylindrical roller bearings: s1 : 17 mm; C : 14 kN

70 mm x 125 mm x 24 mm NTN NJ214 Single row cylindrical roller bearings: Number of Raceway Ring Rows : Double Row; Basic Load Rating, Dynamic Rating(N) : 540000

65 mm x 120 mm x 23 mm NTN NJ213ET2XC3 Single row cylindrical roller bearings: B : 5 mm; Fatigue limit load, Cu : 0.03 kN

65 mm x 120 mm x 23 mm NTN NJ213ET2X Single row cylindrical roller bearings: Volume Discount : Available; Type : Bearings with Housin

65 mm x 120 mm x 23 mm NTN NJ213ET2C3 Single row cylindrical roller bearings: Bearing Part Number : 6804; Flange O.D. H(φ) : 60