NTN-SNR BEARING RULMENTI S.R.L.

Single row cylindrical roller bearings

Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.

Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.

50 mm x 110 mm x 27 mm SNR N.310.E.G15 Single row cylindrical roller bearings
Metric System
2100
50 mm x 110 mm x 27 mm NTN N310C3 Single row cylindrical roller bearings
Square Type
Available
45 mm x 100 mm x 25 mm NTN N309ET2XC3 Single row cylindrical roller bearings
60
Available
45 mm x 100 mm x 25 mm NTN N309ET2XC2 Single row cylindrical roller bearings
For Heavy Load
Cylindrical Bore Set
45 mm x 100 mm x 25 mm NTN N309 Single row cylindrical roller bearings
Deep Groove Ball Bea
Double
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Deep groove ball bearings
Double row spherical roller bearings
Plain bearings,Bushings
Radial shaft seals for general industrial applications
Radial shaft seals for heavy industrial applications
Radial spherical plain bearings
SAF and SAW pillow blocks with bearings on an adapter sleeve
Single row angular contact ball bearings
Single row cylindrical roller bearings
Single row deep groove ball bearings
Single row or matched pairs of angular contact ball bearings
Single row tapered roller bearings
SKF Speedi-Sleeve
SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
Solid Block/Spherical Roller Bearing Housed Units-Double Concentric Four-Bolt Pillow Block
Timken Hm518445 Bearing
3984 Timken Bearing
Timken 13889 Replacement Bearing
Lm12748f Bearing