Single row deep groove ball bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 12 mm x 28 mm x 8 mm NTN 6001JRXLU Single row deep groove ball bearings
- Ball Bearing
- 3.543 Inch | 90 Mill
- 12 mm x 28 mm x 8 mm NTN 6001JRXLLUA1C3/L453 Single row deep groove ball bearings
- 0 °F to 185 °
- Metal manufacturing,
- 12 mm x 28 mm x 8 mm NTN 6001JRXLLH/2AS Single row deep groove ball bearings
- Bearings
- FAG BEARING
- 12 mm x 28 mm x 8 mm NTN 6001JRXLLHAC4/L749 Single row deep groove ball bearings
- Rogersville, TN
- Self Centering
- 12 mm x 28 mm x 8 mm NTN 6001JRXLLU/LP03 Single row deep groove ball bearings
- N/A
- Tapered Roller Beari
- 12 mm x 28 mm x 8 mm NTN 6001JRXLLHC3/1K Single row deep groove ball bearings
- Spherical Roller Bea
- 2.559 Inch | 65 Mill