NTN-SNR BEARING RULMENTI S.R.L.

Single row deep groove ball bearings

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

10 mm x 26 mm x 8 mm NTN 6000ZZC3/L683 Single row deep groove ball bearings
0.5 Inch | 12.7 Mill
0.377 Inch | 9.576 M
10 mm x 26 mm x 8 mm NTN 6000ZZC3/2A Single row deep groove ball bearings
N/A
MOLINE BEARING
10 mm x 26 mm x 8 mm NTN 6000ZZ/L623 Single row deep groove ball bearings
2.559 Inch | 65 Mill
ABEC 1 | ISO P0
10 mm x 26 mm x 8 mm NTN 6000ZZ/LP03 Single row deep groove ball bearings
N/A
SCHAEFFLER GROUP
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Deep groove ball bearings
Double row spherical roller bearings
Plain bearings,Bushings
Radial shaft seals for general industrial applications
Radial shaft seals for heavy industrial applications
Radial spherical plain bearings
SAF and SAW pillow blocks with bearings on an adapter sleeve
Single row angular contact ball bearings
Single row cylindrical roller bearings
Single row deep groove ball bearings
Single row or matched pairs of angular contact ball bearings
Single row tapered roller bearings
SKF Speedi-Sleeve
SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
Solid Block/Spherical Roller Bearing Housed Units-Double Concentric Four-Bolt Pillow Block
Timken Hm518445 Bearing
3984 Timken Bearing
Timken 13889 Replacement Bearing
Lm12748f Bearing