Single row or matched pairs of angular contact ball bearings
Matched Pair Angular Contact Bearings, also called duplex bearings, are machined as matched sets. The pairs are furnished with the race faces ground to provide preload when installed. To accomplish this, a gap is provided between the inner races or outer race of the pair.
There are three types duplex bearing arrangements commonly used and they are Back to Back, Face to Face and Tandem bearing arrangement.
It is a type of duplex bearing arrangement where the two half are placed so that contact angle lines of the bearing converge inwardly. And these contact angle lines form ‘X’ shape, hence called as “X arrangement”.
In face to face arrangement a gap is provided between outer races and when installed, this gap is closed and producing a preload on the bearings. DF arrangement has lower moment stiffness, so they must be spaced sufficiently to provide resistance to moment load.
They can carry heavy radial loads, combined radial and thrust loads, reversing thrust load.
- 90 mm x 190 mm x 43 mm NTN 7318 Single row or matched pairs of angular contact ball bearings
- Cadmium Plated
- 6.35 mm
- 85 mm x 180 mm x 41 mm NTN 7317BGC3 Single row or matched pairs of angular contact ball bearings
- 1.7500 in
- Eccentric Collar
- 85,000 mm x 180,000 mm x 41,000 mm NTN 7317BG Single row or matched pairs of angular contact ball bearings
- 3380 lbf
- Four-Bolt Piloted