Single row cylindrical roller bearings
Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.
Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.
- 105 mm x 190 mm x 36 mm NTN N221 Single row cylindrical roller bearings
- 29800
- Iron plate punching
- 100 mm x 180 mm x 34 mm NTN N220G1 Single row cylindrical roller bearings
- T-Shaped
- Height Selection
- 100 mm x 180 mm x 34 mm NTN N220C3 Single row cylindrical roller bearings
- Radial
- Double Shielded
- 100 mm x 180 mm x 34 mm NTN N220 Single row cylindrical roller bearings
- VV (Non-Contact Rubb
- 60
- 95 mm x 170 mm x 32 mm NTN N219G1C3 Single row cylindrical roller bearings
- VV (Non-Contact Rubb
- Yes (with retaining
- 95 mm x 170 mm x 32 mm SNR N.219.E.G15.C3 Single row cylindrical roller bearings
- T-Shaped
- [Steel] Steel