NTN-SNR BEARING RULMENTI S.R.L.

SKF 6316 c3 Bearing

 

Single row cylindrical roller bearings

Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.

Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.

40 mm x 90 mm x 23 mm  SNR N.308.E.G15 Single row cylindrical roller bearings
40 mm x 90 mm x 23 mm SNR N.308.E.G15 Single row cylindrical roller bearings
Bearings with Housin
Single
55 mm x 100 mm x 21 mm  NTN NJ211ET2X Single row cylindrical roller bearings
55 mm x 100 mm x 21 mm NTN NJ211ET2X Single row cylindrical roller bearings
95 mm
EX207-21G2T20
55 mm x 100 mm x 21 mm  NTN NJ211ET2 Single row cylindrical roller bearings
55 mm x 100 mm x 21 mm NTN NJ211ET2 Single row cylindrical roller bearings
ZZ (Double Shield)
Height Selection
55 mm x 100 mm x 21 mm  NTN NJ211ET2XC5 Single row cylindrical roller bearings
55 mm x 100 mm x 21 mm NTN NJ211ET2XC5 Single row cylindrical roller bearings
No
Tapered hole adapter
55 mm x 100 mm x 21 mm  SNR NJ.211.E.G15 Single row cylindrical roller bearings
55 mm x 100 mm x 21 mm SNR NJ.211.E.G15 Single row cylindrical roller bearings
-40 °C
SP206-207/72N-
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Deep groove ball bearings
Double row spherical roller bearings
Plain bearings,Bushings
Radial shaft seals for general industrial applications
Radial shaft seals for heavy industrial applications
Radial spherical plain bearings
SAF and SAW pillow blocks with bearings on an adapter sleeve
Single row angular contact ball bearings
Single row cylindrical roller bearings
Single row deep groove ball bearings
Single row or matched pairs of angular contact ball bearings
Single row tapered roller bearings
SKF Speedi-Sleeve
SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
Solid Block/Spherical Roller Bearing Housed Units-Double Concentric Four-Bolt Pillow Block
Timken Hm518445 Bearing
3984 Timken Bearing
Timken 13889 Replacement Bearing
Lm12748f Bearing