Single row deep groove ball bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 15 mm x 32 mm x 9 mm NTN 6002LLBC3/2E Single row deep groove ball bearings
- Roller Bearings
- N/A
- 15 mm x 32 mm x 9 mm NTN 6002LLBC3/2AS Single row deep groove ball bearings
- Bearings
- QM INDUSTRIES
- 15 mm x 32 mm x 9 mm NTN 6002LLB/5K Single row deep groove ball bearings
- N/A
- 0053893533933
- 15 mm x 32 mm x 9 mm NTN 6002LLB/L347 Single row deep groove ball bearings
- Yes
- 3.15 Inch | 80 Milli
